788270 KDS Legato 270 Push-Pull 220 Vac 50-60Hz

Name: 788270 KDS Legato 270 Push-Pull 220 Vac 50-60Hz | Syaf Unica Indonesia
SKU: GS 220

HARGA HUBUNGI KAMI

Push-Pull syringe pump. Accommodate two syringes for infusion and two syringes for withdrawal. These models support infusion and withdrawal simultaneously at user defined flow rates and with selectable target volumes to control the total volume pumped. They also support infuse only, withdraw only, infuse/withdraw/ withdraw/infuse and continuous mode, user-defined flow rates with selectable target volumes.

Features

Holds one or two syringes from 0.5 µl to 140 ml
High resolution color touch screen
Real time clock
Unparalleled ease of use
Touch pad “lock” feature
LED light on front panel
Full metal chassis
Built in syringe table
Up to 75 lbs linear force
Advanced microstepping techniques
Built in RS485 interface
USB port
I/O & TTL interface
Continuous mode of operation
Spill dam
Programmable (270P Model)

Bila barang ternyata lebih ringan dari ketentuan produk diatas, maka uang akan dikembalikan.

SKU: GS 220 Kategori: LABORATORIUM UMUM Tag: 788270 KDS Legato, 788270 KDS Legato 270 Push-Pull 220 Vac 50-60Hz, JUAL 788270 KDS Legato, JUAL ALAT KESEHATAN, JUAL OBAT

Features

Holds one or two syringes from 0.5 µl to 140 ml
High resolution color touch screen
Real time clock
Unparalleled ease of use
Touch pad “lock” feature
LED light on front panel
Full metal chassis
Built in syringe table
Up to 75 lbs linear force
Advanced microstepping techniques
Built in RS485 interface
USB port
I/O & TTL interface
Continuous mode of operation
Spill dam
Programmable (270P Model)

Specifications

Accuracy	±0.35%
Reproducibility	±0.05%
Syringes (Min/Max)	0.5 µl to 140 ml
Flow Rate	Minimum (0.5 µl syringe): 3.06 pl/min Maximum (140 ml syringe, 37.948 mm inner diameter): 215.8 ml/min
Display	4.3 WQVGA TFT Color Display with Touchpad
Non-Volatile Memory	Stores all Settings
Connectors	RS232 – 9Pin D-Sub Connector RS485 – IEEE-1394 6 pos USB – Type B I/O & TTL – 15 pin D-Sub Connector
Linear Force (Max)	34 kg (75 lb) @ 100% Force Selection
Drive Motor	1.8 degree Stepper Motor
Motor Drive Control	Microprocessor with 1/16 microstepping
Number of Microsteps per one rev.of Lead Screw	6,400
Step Rate – Minimum	27.5 sec/µstep
Step Rate – Maximum	26 µsec/µstep
Pusher Travel Rate – Minimum	0.36 µm/min
Pusher Travel Rate – Maximum	190.80 mm/min
Power	100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse
Dimensions	16.51 x 25.4 x 27.94 cm (6.5 x 10 x 11 in)
Weight	4.9 kg (10.75 lb)
Operating Temperature	4 degree C to 40 degree C (40 degree F to 104 degree F)
Storage Temperature	-10 degree C to 70 degree C (14 degree F to 158 degree F)
Humidity	20% to 80% RH non condensing
Mode of Operation	Continuous
Classification	Class 1
Pollution Degree	1
Installation Category	II
Regulatory Certification	CE, UL, CSA, CB Scheme, EU RoHS