HARGA HUBUNGI KAMI
The 48 position MULTIVAP nitrogen evaporator (Catalog# 11848) is a high temperature dry block model. This instrument contains a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to the needles or glass pipettes, which direct the gas onto the sample’s surface. This method results in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has a toggle switch for every row of 6 samples, which allows individual rows to be shut off when evaporating batches of less than 48 samples. Nitrogen gas flow is also controlled by an adjustable flow meter and a built in pressure regulator.
The 48 position MULTIVAP uses a heated aluminum dry block to reach evaporative temperatures ranging from 30°C to 120°C. Sample blocks are customized for the user’s sample size for maximum and even heat transfer. Inserts can be customized for sample vial outside diameters of 10-22 mm.
One set of inserts is included with the instrument. Since these inserts and heat blocks are made-to-order, we will request that you deliver us three sample vials for each unique vial size upon placing an order for a 30, 48 or 80 Position MULTIVAP.
All models can withstand contact with organic solvents; however acid resistant models are also available for use with corrosive solutions.
Advantages:
- Capacity: Evaporate batches of up to 48 samples, with outside diameters of up to 22 mm
- Precise: Digital controls allow precise temperature regulation
- Wide Temperature Range: The temperature is controlled up to 120°C to accomplish evaporation of solvents with higher boiling points
- Cost-Effective: Conserve gas by using ON/OFF valve for rows not in use
Standard Features:
- Adjustable flow meter, 0-50 lpm
- Dual band hoist spring assembly
- High temperature limit switch for safety
- Safety control cover plate
- Digital temperature controller
- Electronic timer
- Reset circuit
- Nitrogen filter
- Gas distribution manifold
- Built-in pressure reducing regulator
- High pressure tubing
- Needle guide
Optional Features:
- 220v wiring harness (Option Code -2)
- Z-Purge/intrinsically safe purge case (Option Code -Z)
- Acid resistant coating on instrument and needles (Option Code -RT)
- Pasteur pipette adapters in place of needles (Option Code -P)
Heater Type | Dry Block |
Instrument Catalog Number | 11848 |
Number of Sample Positions | 48 |
Overall Dimensions (w x d x h) | 16 x 14 x 22 in 41 x 36 x 56 cm |
Sample Holder Layout | Rectangular |
Gas Manifold Layout | 6 x 8 Array |
Center to Center Spacing Between Positions | 1.0 in 2.54 cm |
Test Tube Diameter | 10-22 mm OD |
Gas Flow Control On/Off Valve | Every row of 6 |
Gas Flow Meter Range | 0-50 L/min |
Stainless Steel Needles (Length & Gauge) | 4.0 in x 19 ga 102 mm x 19 ga |
Needle Guide | Standard |
Hoist Assembly | Dual Pulley & Band Springs |
Integrated Control Box with Timer for Nitrogen & Heat | Standard |
Built-in Gas Regulator Input | 50-110 psig |
Acid Resistant Coating (Option Code -RT) | Optional |