Nabertherm Tube furnace RHTV 50/150/17

HARGA HUBUNGI KAMI

The high-temperature tube furnaces are available in either horizontal (type RHTH) or vertical (type RHTV) designs. High-quality insulation materials made of vacuum-formed fiber plates enable energy-saving operation and a fast heating time due to low heat storage and heat conductivity. By using different gas supply systems, operations can be performed under non-flammable or flammable protective or reactive gases or under vacuum.

Tmax 1600 °C, 1700 °C, or 1800 °C
MoSi₂ heating elements, mounted vertically for easy replacement
Insulation with vacuum-formed ceramic fiber plates
Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2
Rectangular outer housing with slots for convection cooling
Tube furnaces RHTV with frame for vertical operation
Dual shell housing made of sheets of textured stainless steel
Ceramic working tube made of material C 799 incl. fiber plugs for operation under air
Type B thermocouple
Power unit with low-voltage transformer and thyristor
Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load and with selectable maximum temperature gradient as tube protection
Switchgear and control unit separate from furnace in separate floor standing cabinet
Defined application within the constraints of the operating instructions
NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

Bila barang ternyata lebih ringan dari ketentuan produk diatas, maka uang akan dikembalikan.

SKU: GS 288 Kategori: ANALISIS Tag: JUAL ALAT KESEHATAN, JUAL Nabertherm Tube furnace RHTV 50/150/17, JUAL OBAT, Nabertherm, Nabertherm Tube furnace RHTV 50/150/17

Tmax 1600 °C, 1700 °C, or 1800 °C
MoSi₂ heating elements, mounted vertically for easy replacement
Insulation with vacuum-formed ceramic fiber plates
Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2
Rectangular outer housing with slots for convection cooling
Tube furnaces RHTV with frame for vertical operation
Dual shell housing made of sheets of textured stainless steel
Ceramic working tube made of material C 799 incl. fiber plugs for operation under air
Type B thermocouple
Power unit with low-voltage transformer and thyristor
Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load and with selectable maximum temperature gradient as tube protection
Switchgear and control unit separate from furnace in separate floor standing cabinet
Defined application within the constraints of the operating instructions
NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

Additional equipment

Charge control with temperature measurement in the working tube and in the furnace chamber outside the tube
Display of inner tube temperature with additional thermocouple
Gas tight flanges for protective gas and vacuum operation
Manual or automatic gas supply system
Three-zone control for optimization of temperature uniformity (only tube furnaces RHTH)
Check valve at gas outlet avoids intrusion of false air
Process control and documentation via VCD software package or Nabertherm Control Center (NCC) for monitoring, documentation and control

SPECIFICATION :

Tmax	1600 °C
Outer dimensions in mm (W X D X H)	500 x 650 x 510
Outer tube Ø in mm	50
Heated length in mm	150
Length constant temperature +/- 5 K in mm	30
Tube length in mm	380
Connected load kW	5.4
Electrical connection	3-phase
Weight in kg	70