Nabertherm Forced Convection Chamber Furnace NA 15/65

Call for Price

The very good temperature uniformity of these chamber furnace with air circulation provides for ideal process conditiones for annealing, curing, solution annealing, artificial ageing, preheating, or soft annealing and brazing. The forced convection chamber furnaces are equipped with a suitable annealing box for soft annealing of copper or tempering of titanium, and also for annealing of steel under non-flammable protective or reaction gases. The modular forced convection chamber furnace design allows for adaptation to specific process requirements with appropriate accessories.

The very good temperature uniformity of these chamber furnace with air circulation provides for ideal process conditiones for annealing, curing, solution annealing, artificial ageing, preheating, or soft annealing and brazing. The forced convection chamber furnaces are equipped with a suitable annealing box for soft annealing of copper or tempering of titanium, and also for annealing of steel under non-flammable protective or reaction gases. The modular forced convection chamber furnace design allows for adaptation to specific process requirements with appropriate accessories.

  • Tmax 450 °C, 650 °C, or 850 °C
  • Stainless steel air-baffles in the furnace for optimum air circulation
  • Swing door hinged on the right side
  • Base frame included in the delivery, NA 15/65 designed as table-top model
  • Horizontal air circulation
  • Temperature uniformity up to +/- 4 °C according to DIN 17052-1 (model NA 15/65 up to +/- 5 °C)
  • Optimum air distribution enabled by high flow speeds
  • One frame sheet and rails for two additional trays included in the scope of delivery (NA 15/65 without frame sheet)
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
  • Additional equipment (not for model NA 15/65)
  • Optimization of the temperature uniformity up to +/- 3 °C according to DIN 17052-1
  • Air inlet and exhaust air flaps when used for drying
  • Controlled cooling with fan
  • Manual lift door (up to model N(A) 120/.. (HA))
  • Pneumatic lift door
  • Air circulation with speed control, recommendable for processes with light or sensitive charge

Additional frame sheet

  • Roller conveyor in furnace chamber for heavy charges
  • Annealing boxes
  • Feed and charging aids
  • Safety technology according to EN 1539 (NFPA 86) (models NA .. LS) for charges containing solvents
  • Inlets, measuring frames and thermocouples for TUS measurements charge or comparative measurements
    Charge control
  • Process control and documentation via VCD software package or Nabertherm Control Center (NCC) for monitoring, documentation and control

There are no reviews yet.

Be the first to review “Nabertherm Forced Convection Chamber Furnace NA 15/65”