Hirayama HRH-110 Horizontal Autoclave withOne-touch Lid Interlock System
Clean drying without contamination Pre-vacuum air removal using a vacuum pump Electro-mechanical lid lock system Dual interlock mechanism Dual detection system for residual air
Features & Functions
Clean drying without contamination
After sterilization, drying is performed with the lid closed.
Clean drying can be carried out without worry of contamination.
Pre-vacuum air removal using a vacuum pump
A vacuum pump is installed to remove residual air with vacuum.
This is effective when sterilizing objects put in containers or bags from which air is difficult to escape.
Electro-mechanical lid lock system
The lid can be opened and closed easily and reliably with the one-touch lever.
A pressure seal method is used as a safety measure.
Dual interlock mechanism
The lid is locked by dually detecting the chamber pressure and chamber temperature during operation.
The lock state is maintained even if an operation is manually interrupted.
Dual detection system for residual air
The residual air which may cause sterilization failure is dually detected to always maintain the appropriate sterilization conditions for loads. ?The residual air is detected at the process before pressurization (during operation of an air removal timer) and at the process of pressurization air exhaust.
Power saving design
By reducing power consumption, we can provide more ecological and economical devices.(its power consumption is approximately 2/3, compared with our former autoclave.)